Guide
What is a borehole? How a bore hole works, how deep, and what it costs
Updated
A borehole is a narrow, lined, drilled hole, usually to groundwater. BGS says 1 to several thousand metres deep. Our index prices complete ones at £6,000 to £20,000 (median £12,000).
Borehole, well, or something else?
In everyday use a borehole is drilled and narrow, while a well is the older, wider, hand-dug shaft. The words overlap, and the British Geological Survey keeps both in one archive.
Its National Well Record Collection holds more than 130,000 classified records of wells, boreholes and springs in England and Wales. Its GeoIndex gives free access to over a million scanned onshore borehole, shaft and well records (BGS, borehole records).
Those records let a driller predict the depth under your site before quoting, which is what a borehole survey is for.
The three jobs a borehole does
- Water supply
- The borehole reaches a water-bearing rock (an aquifer) and a pump lifts the water to a house, farm or business. This is the job the price index on this site covers.
- Ground source heat pump
- A closed loop of pipe is grouted into the borehole and fluid circulates through it to collect heat from the ground; no water is taken out. It is priced differently, per metre of loop (see ground source heat pump borehole cost).
- Site investigation
- Engineers drill boreholes to log the soil and rock before they design foundations. The BGS describes a borehole record as a geologist's or surveyor's observations of the rock core, with depths and thicknesses, sometimes with water levels and geochemistry noted on site.
How a water borehole works
- Drilling. A rig drills down through the soil and rock until it reaches water-bearing ground at a depth that will yield enough water. On this site's cost table many domestic boreholes fall between 30 and 100 metres, and depth sets most of the price.
- Lining. The hole is lined with casing so it cannot collapse, with a slotted or screened section where the water comes in, and the top is sealed so surface water cannot run down the outside of the lining.
- Pumping. A submersible pump hangs inside the borehole and pushes water up to the surface, usually into a pressure vessel or storage tank that feeds the taps.
- Treatment and testing. If people drink the water, it is tested and treated as the results require, commonly with filtration or UV (see borehole water testing).
What a borehole costs
Five UK drillers and installers publish a complete borehole price on their own pages, nine figures in all. They run from £6,000 to £20,000, median £12,000, middle half £8,500 to £15,000 (UK Borehole Price Index).
Drilling itself is commonly £50 to £100 a metre on this site's cost table. So the depth your geology needs moves the whole quote (see borehole drilling cost per metre).
Do you need permission?
In England, most abstraction over 20 cubic metres of water a day needs a full Environment Agency abstraction licence (GOV.UK, apply for a water abstraction or impoundment licence). A borehole for one home usually needs none.
A supply that people drink falls under the Private Water Supplies (England) Regulations 2016 (legislation.gov.uk). The licences and rules page sets out both.
What to ask a driller
- What depth do you expect to drill here, and what is that prediction based on?
- What yield do you expect, and is it enough for the water I will use?
- Is your price for drilling only, or drilled, lined, pumped and connected to the house?
- Who arranges the water test, and what happens to the price if the borehole has to go deeper?
Prices are the published figures in our index, read on each firm's own page, and change; your geology sets your price. Rules described are for England.